The servo motor and digital controller with closed-loop control, the controllability from low speed to high speed is excellent. Good reproducibility of the machine, excellent stability and controllability.
300mm/sec and high efficiency 0.01 accuracy.
All-electric servo control can control the operation of each axis, and can also adopt compound multi-axis operation, which can effectively shorten the molding cycle time.
The integrated platform uses linear slide movement, using a single-track three-slide, with high screw motion straightness accuracy and no shifting.
Clamping Features:
Toggles are 4 points design, clamping force ratio is large, increase the ball screw’s lifetime.
No touch design between tie bar and moving platen, reduce the effect on mold if tie bars are distorted. This design also achieves no oil pollution at molding zone.
Moving platen pads use assembly design, easy to maintain and adjust. The structure is a high-rigidity 2-piece assembled wide platen, which is combined with a high-precision linear slide rail to effectively reduce the friction force by 90%, and ensure the parallelism of the platens and prevent the mold wall from being inclined. In addition to protecting precision molds and greatly improving the precision of molded products.
The platens structure is designed by PRO/E finite element analysis software. After the safety factor is increased, the overall deformation is extremely low.
Structural optimization, longer open stroke.
Precise mold opening positioning, can be used with robot arm for automation, and suitable for precision molding with a snatching accuracy of 0.1mm.
Ability:
Cleanliness, no hydraulic oil leakage or oil phenomenon. Suitable for use in cleanroom as machine and working environment can be kept clean. It meets energy conservation and environmental protection.
Lower operational noise than hydraulic injection machine. Reduces environmental noise pollution and operator hearing damage.
It stops and no longer consumes power while it reaches the positioning or finishes the cycle.
Specification
Model
ALL-ELECTRIC AE-110
Injection Unit
Screw Diameter
ψmm
28
32
35
Theoretical Injection Volume
cm³
86
112
134
Shot Weight (P.S.)
gr
79
103
123
oz
2.8
3.65
4.37
Plasticizing Capacity (P.S.)
kg/hr
21
37
44
Injection Rate
cm³/sec
184
241
288
Injection Pressure
kg/cm²
2491
1876
1594
Screw Speed
rpm
0-300
Clamping Unit
Clamping Force
ton
110
Opening Stroke
mm
380
Mold Thickness (Min-Max)
mm
140-425
Platen Size (HxV)
mm
610x610
Distance Between Tie Bars (HxV)
mm
410x410
Ejector Force
ton
3.3
Ejector Stroke
mm
110
Electrical Equipment
Heat Zones
set
4
Heater Capacity
KW
5.2
General
Machine Size (LxWxH)
m
4.9x1.4x2.1
Machine Net Weight
ton
5.5
*All specifications and designs are subject to change without notice.